Tekoki!!! - It moves when you get touched [No setup on their side / Position tracking supported]

A tool that delivers where you were touched in VRChat, and how hard, straight to the device in your hand.

Tekoki!!! turns the distance into an intensity when the other person's hand or head comes close to a reaction zone placed on your avatar, and drives your device through Intiface Central. Stroked, it is weak; pressed against, it is strong. Move the rod or the cube up and down and a position-capable device follows that movement. For time with a friend, for time alone, for a reaction bit on stream.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

■ Included items

・vrc-haptics-bridge.exe — the main program that connects VRChat and Intiface. It runs on a single config file

・VRCHaptics.unitypackage — prefabs you just place on your avatar (4 reaction zones + a grabbable rod + a depth measuring rig)

・HapticsProbe prefab — a sensor you attach to your own prop to measure position

・config.example.json — a config template (with Japanese comments)

・README.txt — the setup guide in Japanese

・DEVICES.txt — the supported device list (779 models / 117 brands)

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

■ Gimmick / features

・4 zones - head, chest, hips and a free one - output 0-100% intensity according to how close the touch is (uses VRC Contacts)

・Pull or push the grabbable rod and a position-capable device moves to the same position (uses PhysBone)

・The depth measuring rig measures how deep a prop is moved up and down and converts it into a position

・On devices that cannot output a position, the speed of the movement is converted into vibration strength

・You can turn everything on and off at once from the VRChat menu

・It always stops when there is no reaction for 5 seconds, when you switch avatar, and when you close the exe

・Multiple devices at once, each assignable per zone

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

■ Supported devices

・Models supported by Intiface Central (Buttplug) work as they are. 779 models / 117 brands as of September 2026 (Lovense, Svakom, Satisfyer, Kiiroo, WeVibe, JoyHub and others)

・Position tracking is available only on models that have the Position feature (examples: The Handy, Kiiroo Keon / Onyx+, Lovense Solace Pro, Vorze Piston, the OSR2 family)

・Vibration-only models (such as the Lovense Max 2) work by converting the strength of the touch and the speed of the movement into vibration

・Please check the support status of your model in the bundled DEVICES.txt and on the IoST Index. Operation on any specific model is not guaranteed

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

■ Compatibility

・Modular Avatar compatible (just place it)

・The other person: no setup required. Even on an ordinary avatar, they get a reaction by touching with a hand, a finger or the head

・Device: models supported by Intiface Central (Buttplug-compatible devices). Position tracking only on models that have the Position feature

・PC only (the exe does not run on a standalone Quest). The VRChat avatar can be either PC or Quest

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

■ How to install

1. Import VRCHaptics.unitypackage into a project with Modular Avatar added through VCC

2. Place the VRCHaptics prefab directly under your avatar and upload

3. Start Intiface Central and connect your device

4. Start vrc-haptics-bridge.exe and turn OSC on in the VRChat settings

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

■ Notes

・This product is for adults (R-18). Only for use by those 18 or older

・It is an unofficial tool with no connection to VRChat Inc. or Nonpolynomial Labs (Intiface / Buttplug)

・How each device model feels and how fast it follows depend on the model and on the Bluetooth environment. Adjust the strength and the range in the config file

・Linking with the other person's genital parts (SPS etc.) is not supported. Only hands, fingers and heads get a reaction

・PhysBone parameters may behave differently when VRChat changes its specification

・The reaction zones use VRC Contacts, so watch out for your avatar's Contacts limit

・Not tested on platforms other than VRChat

・Stop using it immediately if you feel unwell

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

■ Contents

The main (3,000 JPY) zip:

・vrc-haptics-bridge.exe

・config.example.json

・VRCHaptics.unitypackage

・README.txt (setup guide)

・DEVICES.txt (supported device list)

The license (free) zip:

・EULA.txt

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

■ License

・You are free to modify it for your own use

・You are free to upload, stream and film avatars that incorporate this product

・Redistributing, transferring, uploading or reselling the product's own files (the exe, the unitypackage, the config file) is prohibited

・The author takes no responsibility for any damage whatsoever arising from use of this product

The full text is in EULA.txt in the free variation "License (free - read before you buy)". Please read it before purchase.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

■ Supported device list

▼ Models that can use position tracking (up-and-down movement)

・The Handy — Buttplug support over a direct Bluetooth connection. The standard choice for position tracking

・Kiiroo Keon — Position supported. The older Fleshlight Launch is the same family

・Kiiroo Onyx+ / Onyx 2 — Position supported

・Lovense Solace / Solace Pro — the Solace Pro supports Position. The plain model is mainly reciprocation-speed controlled, so motion mode is recommended in the settings

・Vorze A10 Piston SA — Position supported (via the USB dongle)

・OSR2 / SR6 / SSR1 (TCode DIY family) — Position supported over TCode serial. For DIY builders

・Hismith range / Lovense Gravity — Oscillate (reciprocation speed) rather than Position. This product sends the speed through motion mode

・Lovense Max / Max 2 — vibration + air pressure (Constrict). Position tracking is not possible. Usable as a vibration zone

For the full list of all 779 models see the bundled DEVICES.txt and the IoST Index (https://iostindex.com/?filter0ButtplugSupport=4). Operation on any specific model is not guaranteed.