複数アバター対応 偶蹄ブーツ -Hoof Boots-
상품 설명
導入方法
・Unityで装着する事が出来ます。
Can be attached in Unity.
Modular avatar
https://modular-avatar.nadena.dev/ja/
注意事項
・各アバター 膝下のをシェイプキーで非表示にしてください。
・桔梗ちゃんのみメッシュデリーター等で素体側の足を削除及びアルファレイヤーで非表示してください(仕様上足の裏のみ表示されてしまいます)
・アバターの動きによって足首などの非表示にしている部分が貫通する事があります。気になりましたら、アルファレイヤー等で非表示にしてください。
(シェイプキーはすべてヒール状態の足に合わせております)
・しなのちゃん・愛莉ちゃんは膝から下の足をシェイプキーで非表示にしてください。
・マットキャップで色変えができます(蹄部分と鱗部分の艶改変等可能です)
・改変しやすいPSDファイルを同封しております。
・デフォルトの状態ですと足元が埋まります。
・ミルティナちゃんは膝元をシェイプキーで非表示にしてください。
・しゅあんちゃん、スリムシェイプキーに対応しています。
しゅあんちゃん、まおちゃんはノーマルマップのみ4Kを使用しています。
ヒールツール等を利用してアバターの高さを変えてください。
アバター接地調整ツール
https://booth.pm/ja/items/4579337
FloorAdjuster(VRCで足が埋まる/足が浮くのを直すツール)
https://booth.pm/ja/items/5756378
For each avatar, please hide the lower legs (below the knees) using shapekeys.
For Kikyo only, please remove the avatar’s original legs using a mesh deleter and/or hide them with an alpha layer. Due to specifications, only the soles of the feet may remain visible.
Depending on the avatar’s movement, hidden areas such as the ankles may clip through. If this is noticeable, please hide them using an alpha layer or similar method.
(All shapekeys are adjusted to fit feet in a heeled position.)
For Shinano and Airi, please hide the legs below the knees using shapekeys.
Colors can be changed using MatCap (it is possible to adjust glossiness on the hoof and scale parts).
An easy-to-edit PSD file is included.
In the default state, the feet may sink into the ground.
For Mirtina, please hide the area around the knees using shapekeys.
Shuan supports the Slim shapekey.
Shuan and Mao use 4K resolution only for the normal maps.
Please adjust the avatar’s height using a heel tool or similar utility.
内容物
テクスチャ
material 9種
FBX
Prehub 9種
利用規約
本規約はVN3ライセンスを使用して制作しました。
本モデルを購入、Boothのギフト機能を利用しての譲渡をされた時点で本利用規約に同意したものとします。
必ず規約を確認後ご利用ください。
JP
https://drive.google.com/file/d/13j1cwISEpbZzZmOhRx-luTvL88GwpdQi/view?usp=drive_link
EN
https://drive.google.com/file/d/1Au0Py1M42rJaeS89cvhgaIPBnGvZjN7j/view?usp=drive_link
KO
https://drive.google.com/file/d/173xoP8CkstYuFxPk8Agczng7-srGOA2W/view?usp=drive_link
ZH
https://drive.google.com/file/d/10JGcZ2F5AMoOe8itHv4Wh7MsZmAoNXeb/view?usp=drive_link
対応アバター
オリジナル3Dモデル「セレスティア」ver1.02
https://booth.pm/ja/items/4035411?
オリジナル3Dモデル「マヌカ」ver1.00
https://booth.pm/ja/items/5058077
オリジナル3Dモデル「萌」Ver.1.02.1
https://booth.pm/ja/items/4667400
【オリジナル3Dモデル】龍のヨルちゃん
https://skd-noratama.booth.pm/items/3923094
オリジナル3Dモデル「桔梗」
https://booth.pm/ja/items/3681787
【オリジナル3Dモデル】 Sio / しお
https://booth.pm/ja/items/5650156
【オリジナル3Dモデル】Lasyusha〈ラシューシャ〉
https://booth.pm/ja/items/4825073
オリジナル3Dモデル「しなの」
https://ponderogen.booth.pm/items/6106863
オリジナル3Dモデル「愛莉」Ver.1.00
https://booth.pm/ja/items/6082686
オリジナル3Dモデル『ミルティナ』
https://booth.pm/ja/items/6538026
【オリジナル3Dモデル】ビナア〈Binah〉
https://booth.pm/ja/items/5694887
オリジナル3Dモデル「しゅあん/Shuan」Ver.1.0
https://booth.pm/ja/items/6669962
オリジナル3Dモデル「真央」-mao-
https://booth.pm/ja/items/6846646
オリジナル3Dモデル「イチゴ」
https://booth.pm/ja/items/7328789
オリジナル3Dモデル「ひきくまりのクマリ」
https://booth.pm/ja/items/7928592
うらら -Urara- / オリジナル3Dモデル
https://booth.pm/ja/items/8166471
オリジナル3Dモデル「黑见」Kuroki v1.0
https://yaoklisub.booth.pm/items/8822547
SiuSiu / オリジナル3Dモデル
https://booth.pm/ja/items/8426340
Update
5/6 別封で高画質版materialを追加しました
10/16 愛莉・しなのちゃん対応
25/2/1 ミルティナちゃん対応
25/3/7 ビナアちゃん対応
25/4/16 みるてぃなちゃん ウェイト修正 マテリアルの修正
25/6/22 真央ちゃん・しゅあんちゃん対応
26/2/2クマリちゃん対応
2/15 ヨルちゃん新ボディ対応Ver4.1のみ対応しています
9/10 kurokiちゃん対応
모든 리뷰
더보기리뷰 등록
리뷰를 작성하려면 로그인이 필요합니다.
로그인하고 리뷰 쓰기